• Skip to primary navigation
  • Skip to content
  • Skip to primary sidebar
  • Skip to footer

CATIA V5-V6 Tutorials

Tips and tricks, tutorials and workflow

  • CATIA tips and tricks
  • CATIA V5 Tutorials
    • Assembly
    • DMU Kinematics Simulator
    • DMU Navigator
    • DMU Space Analysis
    • Drawing
    • General Structural Analysis
    • Generative Shape Design
    • Part Design
  • How to
  • Video tutorials
  • About
  • Contact

You are here: Home / CATIA V5 Tutorials / Compare 2D Drawings in CATIA V5 using CGM

Compare 2D Drawings in CATIA V5 using CGM

12/22/2015 by Joe 1 Comment

An easy way to compare 2D drawings in CATIA V5 is to use CGM (Convergence Geometric Modeler). With this, you’ll see the differences between two 2D drawings superposed. What you need, it is only the .CATDrawings files to save in .cgm format to use this function.

  1. Open first version of 2D Drawing, navigate to File -> Save as -> Type a name in File name input and select cgm to Save as type
  2. Open second version of 2D Drawing and follow same steps like a first step.
  3. Close both versions of cgm files saved before.
  4. Open first cgm saved.
  5. Use Compare Drawings button from cgm interface and select last cgm saved before at step 2 and click OK.

compare-drawings-catia-v5-tutorial

To better understanding watch the below video tutorial. See also the tutorial for 3D Comparation in CATIA V5.

Related Posts:

  • How to compare two parts in CATIA V5How to compare two parts in CATIA V5
  • Save/Export assembly in igs, step, stl format in CATIA V5Save/Export assembly in igs, step, stl format in CATIA V5
  • How to write a text in CATIA in 5 stepsHow to write a text in CATIA in 5 steps
  • Export multiple drawing sheets in one PDFExport multiple drawing sheets in one PDF
Your friends will be happy to read this...
Share on Facebook
Facebook
0Share on LinkedIn
Linkedin
Share on Google+
Google+
0Tweet about this on Twitter
Twitter

Filed Under: CATIA V5 Tutorials Tagged With: catia v5 compare 2d, compare 2d drawing

Reader Interactions

Comments

  1. Harish says

    05/16/2018 at 3:53 pm

    How shall i save this Compared drawing in Catia??

    Reply

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Primary Sidebar




Ask me a question

If you want to obtain punctual answer for your question please tell me what you want to know about CATIA. For this use the contact page.

Recent Posts

  • How to render a part or assembly in CATIA V5
  • Parameterization in assembly module using formula – CATIA V5 tutorial part 1
  • How to use Sectioning in CATIA V5
  • CATIA V5 Drafting Beginner Tutorial – How to create a 2D using Drafting
  • How to close a surface in CATIA V5
  • Part Design Tutorial – Carter (Circular Pattern, Spherical Surface, Complex Design)
  • How to close a surface in CATIA V5 – Part Design and Generative Shape Design
  • Generative Shape Design #1 – CATIA V5 Beginner Tutorial – How to use Extrude and Split
  • CATIA V5 Video Tutorial for Beginners #9 – Part Design
  • CATIA V5 Video Tutorial Beginner #8 – Part Design Support

How to render a part or assembly in CATIA V5

Rendering a part is the last step for a final product. If you want to make a real look for your part, you should use this feature of CATIA application. The rendering time of a part or assembly is different depending to the settings and quality do you choose. For example, if you want to […]

Parameterization in assembly module using formula – CATIA V5 tutorial part 1

Parameterization in assembly module using formula – CATIA V5 tutorial part 1

A short tutorial about how to design an assembly parametric using formula in CATIA V5. At first, you must establish the main parameters that will change the all structure of an assembly (in this case, a screw, a nut or washer). It is simple if you know what you want to do before you start. […]

How to use Sectioning in CATIA V5

How to use Sectioning in CATIA V5

In this article I will show you how to use Sectioning command in CATIA V5, how to export as a new Part to use also in Drawing and more. This command is very useful when you work with large assemblies and you want only a part to make some measurements or to make screenshots for […]

Footer

Recent Posts

  • How to render a part or assembly in CATIA V5
  • Parameterization in assembly module using formula – CATIA V5 tutorial part 1
  • How to use Sectioning in CATIA V5
  • CATIA V5 Drafting Beginner Tutorial – How to create a 2D using Drafting
  • How to close a surface in CATIA V5
  • Part Design Tutorial – Carter (Circular Pattern, Spherical Surface, Complex Design)
  • How to close a surface in CATIA V5 – Part Design and Generative Shape Design
  • Generative Shape Design #1 – CATIA V5 Beginner Tutorial – How to use Extrude and Split
  • CATIA V5 Video Tutorial for Beginners #9 – Part Design
  • CATIA V5 Video Tutorial Beginner #8 – Part Design Support

Contact me

Your Name (required)

Your Email (required)

Subject

Your Message

Enter the below code:

captcha

Categories

  • Assembly
  • CATIA tips and tricks
  • CATIA V5 Tutorials
  • CATIA V6 Tutorials
  • DMU Navigator
  • Drawing
  • General Structural Analysis
  • Generative Shape Design
  • How to
  • Knowledge Advisor
  • Part Design
  • Q&A
  • Video tutorials

Copyright © 2019 · Genesis Sample on Genesis Framework · WordPress · Log in

We use cookies to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners. Accept Read More
Privacy & Cookies Policy